Draytek Vigor2960 Guia de Instalação descarregar pdf (Página 31)

Vigor2960 Series Quick Start Guide

This section will guide you to solve abnormal situations if you cannot access into the

Internet after installing the router and finishing the web configuration. Please follow

sections below to check your basic installation status stage by stage.

¾ Checking if the hardware status is OK or not.

¾ Checking if the network connection settings on your computer are OK or not.

¾ Pinging the router from your computer.

¾ Checking if the ISP settings are OK or not.

¾ Backing to factory default setting if necessary.

If all above stages are done and the router still cannot run normally, it is the time for you

to contact your dealer for advanced help.

Follow the steps below to verify the hardware status.

1. Check the power line and LAN cable connections. Refer to “2.1 Hardware

Installation” for details.

2. Turn on the router. Make sure the ACT LED blink once per second.

3. If not, it means that there is something wrong with the hardware status. Simply back

to “2.1 Hardware Installation” to execute the hardware installation again. And

then, try again.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Sem comentários

Draytek Vigor2960 Guia de Instalação Página 31