Draytek VigorAP 700 Guia do Utilizador

VigorAP 700 User’s Guide i

VigorAP 700 User’s Guide 21-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instruc

VigorAP 700 User’s Guide 31-3 Package Contents Before you starting to use this access point, please check if there’s anything missing in the package,

VigorAP 700 User’s Guide 41-4 Familiar with your new VigorAP 700 Front Panel LED Status Description On The device is powered on. PWR Off The de

VigorAP 700 User’s Guide 5Back Panel Interface Description Antennas Two reserve SMA antenna connectors for screwing 3dBi detachable antennas enclo

VigorAP 700 User’s Guide 6This page is left blank.

VigorAP 700 User’s Guide 7Chapter II: System and Network Setup 2-1 Installing VigorAP 700 to your Network Please follow the following instruction to

VigorAP 700 User’s Guide 82-2 Connecting to VigorAP 700 by Using Web Browser After the network connection is built, the next step you should do is se

VigorAP 700 User’s Guide 92. Select Specify an IP address, then input the following settings in respective field and click OK when finish. IP addres

VigorAP 700 User’s Guide 102-2-2 Windows 2000 IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), t

VigorAP 700 User’s Guide 112-2-3 Windows XP IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), the

VigorAP 700 User’s Guide ii

VigorAP 700 User’s Guide 122-2-4 Windows Vista IP address setup 1. Click Start button (it should be located at lower-left corner of your computer),

VigorAP 700 User’s Guide 132-2-5 Connecting to Web Management Interface All functions and settings of this access point must be configured via web ma

VigorAP 700 User’s Guide 14NOTE: If you can’t see the web management interface, and you’re prompted to input user name and password again, it means y

VigorAP 700 User’s Guide 15Here are descriptions of every item: System Uptime Displays the total passed time since the VigorAP 700 is powered. Hardw

VigorAP 700 User’s Guide 162-4 Select an Operating Mode for Wireless Access Point This access point can be operated in different modes; you can click

VigorAP 700 User’s Guide 17to accept wireless clients while the access point is working as a wireless bridge. Universal Repeater This product can ac

VigorAP 700 User’s Guide 18and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 n clien

VigorAP 700 User’s Guide 192-4-1-1 Multiple SSID This access point supports four SSIDs. Except the main SSID (it can be configured in Basic Setting p

VigorAP 700 User’s Guide 20instant responding. Therefore you can improve the performance of such network applications. VLAN ID (0:Untagged) If your n

VigorAP 700 User’s Guide 21connect to this access point, select 2.4GHz (B+G+N). Main SSID Please input the SSID (the name used to identify this Vigo

VigorAP 700 User’s Guide iii VViiggoorrAAPP 770000 WWiirreelleessss AAcccceessss PPooiinntt User’s Guide Version 1.1 Date: 13/01/2011

VigorAP 700 User’s Guide 22 Here are descriptions of every setup item: Select Click the radio button to select the access point. Channel Display th

VigorAP 700 User’s Guide 23 2-4-3 AP Bridge-Point to Point Mode In this mode, this VigorAP 700 will connect to another VigorAP 700 which uses the sam

VigorAP 700 User’s Guide 24MAC address 1 Please input the MAC address of the VigorAP 700 you wish to connect. After you finish with setting, please

VigorAP 700 User’s Guide 252-4-4 AP Bridge-Point to Multi-Point Mode In this mode, this VigorAP 700 will connect to up to four VigorAP 700s which use

VigorAP 700 User’s Guide 26 After you finish with setting, please click Apply, and the following screen will be displayed: When you see this message

VigorAP 700 User’s Guide 27Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be able to allow or den

VigorAP 700 User’s Guide 28 When you see this message, the settings you made is successfully save. You can click Continue to return to previous page

VigorAP 700 User’s Guide 29client of a certain band. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless

VigorAP 700 User’s Guide 302-4-2-1 for more information about the Wireless Site Survey Table. After you finish with setting, please click Apply, and

VigorAP 700 User’s Guide 31 Here are descriptions of every setup item: Enable WPS Check this box to enable or disable WPS function. Wi-Fi Protected

VigorAP 700 User’s Guide ivCOPYRIGHT Copyright ©2011 by this company. All rights reserved. No part of this publication may be reproduced, transmitt

VigorAP 700 User’s Guide 32set on this access point, nothing will be displayed here. Device Configuration Config Mode: There are Registrar and Enroll

VigorAP 700 User’s Guide 332-6 Advanced Wireless Settings This VigorAP 700 has many advanced wireless features. Please note that all settings listed

VigorAP 700 User’s Guide 34Data Rate Set the wireless data transfer rate to a certain value. Since most of wireless devices will negotiate with eac

VigorAP 700 User’s Guide 35 When you see this message, the settings you made is successfully save. You can click Continue to return to previous page

VigorAP 700 User’s Guide 36 Note: If you have enabled Multiple SSID function, please select the SSID network you wish to configure in advance. Please

VigorAP 700 User’s Guide 372-7-1 Disable Security Select the SSID you wish to configure. When you select Disable, wireless encryption for the network

VigorAP 700 User’s Guide 38 Here are descriptions of every setup item: Key Length There are two types of WEP key length: 64-bit and 128-bit. Using 1

VigorAP 700 User’s Guide 39Authentication Section 2-7-5 for detailed instructions. After you finish with setting, please click Apply, and the follow

VigorAP 700 User’s Guide 40 When you see this message, the settings you made is successfully save. You can click Continue to return to previous page

VigorAP 700 User’s Guide 41RADIUS Server Port Please input the port number of RADIUS authentication server here. Default value is 1812. RADIUS Serve

VigorAP 700 User’s Guide vFCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spac

VigorAP 700 User’s Guide 42 When you see this message, the settings you made is successfully save. You can click Continue to return to previous page

VigorAP 700 User’s Guide 432-8 Radius Server Comparing to other wireless security measures, radius server provides user-based authentication. If your

VigorAP 700 User’s Guide 44Cancel to clear the text you typed in above three fields. All current radius users will be listed here. If you want to del

VigorAP 700 User’s Guide 452-9 MAC Filtering Another security measure you can use to keep hackers and intruders away is MAC filtering. You can pre-de

VigorAP 700 User’s Guide 46Enable Wireless Access Control Check this box to enable MAC address restriction. If unchecked, no restriction will be enfo

VigorAP 700 User’s Guide 472-10 System Utilities This access point provides some control functions include password, IP address management, and DHCP

VigorAP 700 User’s Guide 482-10-2 IP Address of the Wireless Access Point You can change the IP address of this VigorAP 700 to make it becoming one p

VigorAP 700 User’s Guide 492-10-3 DHCP Server This VigorAP 700 is capable to act as a DHCP server for your network. It is disabled by default. If you

VigorAP 700 User’s Guide 50When you see this message, the settings you made is successfully save. You can click Continue to return to previous page a

VigorAP 700 User’s Guide 512-11 Configuration Backup and Restore You can backup all configurations of this access point to a file, so you can make se

VigorAP 700 User’s Guide viEU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, D

VigorAP 700 User’s Guide 522-12 Firmware Upgrade If there is new firmware of this VigorAP 700 available, you can upload the firmware to the access po

VigorAP 700 User’s Guide 532-13 Restart When you think the access point is not working properly, you can use this function to restart the access poin

VigorAP 700 User’s Guide 54This page is left blank.

VigorAP 700 User’s Guide 55Chapter III: Troubleshooting If you found the access point is working improperly or stops responding to you, don’t panic!

VigorAP 700 User’s Guide 56powered. I can’t locate my access point by my wireless client a. Check if Broadcast SSID is set to off. b. Is Antenna p

VigorAP 700 User’s Guide 57Appendix: Glossary Default Gateway (Access point): Every non-access point IP device needs to configure a default gateway’s

VigorAP 700 User’s Guide 5811111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be described simply as “x” number of lead

VigorAP 700 User’s Guide 59Telnet TCP 23 FTP TCP 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP

VigorAP 700 User’s Guide viiTable of Content Chapter I: Product Information...1 1-1

VigorAP 700 User’s Guide viii2-13 Restart .......

VigorAP 700 User’s Guide 1Chapter I: Product Information 1-1 Introduction Thank you for purchasing this VigorAP 700! With this high cost-efficiency V